Gymnasium Wall Pads

Wall Pads
Wall Pads Wall Pads Wall Pads
Wall Pads

Click an image to enlarge
in a separate window

Jaypro manufactures high quality gym wall padding to provide heavy-duty protection for indoor impact areas. Jaypro’s Wall Pads are ideal for basketball courts, gymnastics areas, wrestling rooms, rehabilitation centers—any surface area where padding is needed. Jaypro will custom make pads any shape or size, including those for columns, beams, doors and stage fronts. All pads are manufactured in one-piece construction. Laced, round post pads without a waferboard backing available. All standard Wall Pads include a 1" lip on the top and bottom for easy installation over finished or unfinished walls.

Standard pad construction:

  • A 2" thick, 3.5 lb. density, polyurethane foam pad bonded to a 7/16" thick waferboard, which is fully wrapped in a vinyl-coated polyester covering, enhanced by a leather-like emboss pattern.


    • Mounting options available:
  • 1" Nailing Margins
  • “Z”–Clips at the top and bottom for wall mounting pads.
  • Edges of pad are flush with the wood backer. Eliminates 1" lip.
  • “Z”–Clip at top and 1" nailing strip at the bottom.
  • Channel System: channel attaches to wall clips; trims out top and bottom lip; remove single pads as needed for repair.

    Catalog

    Care and Warranty Info

    Instructions

    Submittal

    		•  Related Products

     

    Class A Flame Retardant Wall Pads

    Jaypro’s flame retardant wall pads have been independently tested as a singular unit and have been found to meet requirements of 2003 IBC Section 803.2.1, when tested in accordance with NFPA 286, and given a “Class A” rating in accordance with ASTM-E84 and NFPA 255 test procedures.

  • Test Results: flame Spread Index = 20; Smoke Developed Index = 350.
  • Jaypro uses state of the art flame resistant polychloroprene latex, open cell foam cushioning material, rigid OSB backing and vinyl-coated polyester covering enhanced by a leather-like emboss pattern.
  • Coverings come in a full range of colors.

    Catalog

    Care and Warranty Info

    Instructions

    Submittal

    		•

     

    image

    Wall Pad Cut-Out Trim Kit

    Jaypro Wall Pad Cut-Out Trim Kit provides a neat and clean answer to accessing receptacles and switches. Simply make the necessary field cut-out then insert and staple the molded rubber trim kit.

  • Manufactured from fire-resistant molded rubber and sized to accommodate any wall pad with the standard 2-7/16" thickness.
  • Wall Pad Cut-Out Trim
  • Kit is available in gray or black and can be used with single or double gang electrical boxes as well as standard sized fire alarms.

    Submittal

    		•